R2 is a high performance "laboratory grade" mixed bed ion exchange resin with color changing exhaustion indicator.

Its color changes from deep purple to yellow with an evident chromatic effect.

It consists of a mixture of two polystyrene gel resins:
a strong anionic resin and a strong cationic resin.

It has a high degree of phosphate and other residual anions (silicate, arsenate, vanadate, borate, etc.) removal and an output conductivity of about 0.1 µs/cm.

Ideal to be used in post-osmosis regenerable cartridges for high efficiency total deionization and to obtain high purity water.
To this end, the resin must be placed inside a refillable cartridge (for example: https://www.alxyon.com/shop/en/reverse-osmosis/empty-cartridge-for-ro-systems.html), in turn placed inside an inspectable vessel (for example: https://www.alxyon.com/shop/en/reverse-osmosis/reverse-osmosis-filter-vessel-10-pp-transparent-eu.html).
The vessel containing the resins must therefore be placed as the last filtering stage; at the outlet (in series) to the osmotic membrane.

In a properly designed and functioning osmotic system, the conductivity leaving the osmotic membrane (before entering the resin stage) should be a few μS/cm.
Ideally under 10-20.
And the conductivity out of the final resin stage should be 0 (ZERO).

The activity / efficacy of the resins must be monitored through the use of a correctly calibrated conductivity meter and the resins must be replaced when the conductivity leaving the system returns above the limit value considered tolerable for the type of use or close to that in exit from the osmotic membrane.

Alxyon recommends replacement when conductivity rises above 10-20 μS / cm